| THICKNESS
OF THE FILM (MICRONS) |
MAXIMUM |
MINIMUM |
Although carefully computed
must be considered approximate
only and are not guaranteed.
For producing (bottom weld,
double-weld bags. Doted or plane
TPS bags.)
•
The machine frame is made of
prefabricated M.S and Cast iron
materials flame cut sheet 12mm
thick to ensure machine rigidity,
reduce machine vibration under
high speed running.
• Feeding motor, automatic
control, reduced labor requirements,
stability in operation, Different
types of bags with several uses
optional, easy to replace.
• A folding frame can
be supplied for single wound
sheet it’s made with staness
steel, M.S., and cast iron fabricated
design. This helps to reduce
reel changes as each reel contains
more meters for the same diameter.
For converting sheet film, a
folding unit can be purchased
to run in-line or off line with
extra attached unit call unwinder
with the machine. A low friction
top folding device for a single
or twin side fold through a
system of folding rollers with
guide plates is fitted. The
whole unit is well designed
for ease of operation and low
maintenance. (folding device
is equipped with edge grinding
or web guiding for accurate
folding is optional)
• The auto collection
device is equipped and designs
for deliver the finished bags
exactly counted in each cycle.
This series of machine uses
photocells for precise control
of print image to the side weld
bags.
the pneumatically controlled
handle punch equipped with knife
type cutter which is designed
for long life and is easily
changeable.
The longitudinal dimension is
continuously sealed by heated
wire, which can be adjusted
after top folding. The size
of the bag is easily changed,
with no limit.
At the rear, one unwinds station
for the polyethylene handle
film. The film width is identical
to the loop length. The film
is cut into narrow strips, and
fed into the top fold. The flexible
handle film feeding system is
driven by pneumatic control.
The roll of the film is fed,
cut and welded automatically
and is precisely positioned
to the center of the carrier
bag. The film for the Poly Draw
Handle should be pre-slit to
width and automatically fed
into the top folds of the carrier
bag by special forming tool.
the patch handle film feeding
system is driven by pneumatically.
The reel of patch film is fed,
cut and welded automatically
to the top central position
of the PE Carrier bag.
A very unique servo driven side
weld bag maker specially designed
to make small bags to a minimum
draw length of 30mm. These value
added bags are used to pack
fancy Stationery items like
pens, notepads, Stickers, etc.
and Hosiery items like socks,
under garments etc. The applications
are endless.
|
